Protimeter MMS 2 BLD8800 | BLD8800-S

Complete moisture measurement and diagnosis system for building environments. The Protimeter MMS 2 is a 4-in-1 instrument, ergonomically designed for easy one-handed operation, when measuring moisture in materials in buildings and related structures. It can measure surface moisture and moisture below a surface, as well as acting as a hygrometer to measure ambient air humidity. The addition of an infra-red thermometer allows the difference between dew point and surface temperature to be calculated, as well as a wide range of other important psychometric parameters. The new MMS 2 will help building professionals such as surveyors, inspectors and architects to assess building moisture levels during new build and refurbishing activities and assist in the diagnoses of moisture-related problems in existing buildings. MMS 2 BLD8800 Basic Kit Protimeter MMS 2 QuikStick Short – POL8751 Heavy Duty Moisture Probe – BLD5060 Calcheck Device – BLD5086 Operators Instructions – 9v Battery – Pouch MMS 2 BLD8800-S Basic Survey Kit Protimeter MMS 2 QuikStick Short – POL8751 Hygrostick – POL4750 Hygrostick Extension Lead – BLD5802 Heavy Duty Moisture Probe – BLD5060 Deep Wall Probes 5″ (127mm) – BLD5018 Calcheck Device – BLD5086 Software & Download Cable – BLD7758 Operators Instructions – 9v Battery – Pouch Introducing the MMS 2 When concise and accurate environmental readings need to be reported, the MMS 2 gets the job done. The ability to record readings instantly at the push of a button makes this instrument ideal for many applications including: Building survey Flood & fire restoration Concrete floor moisture measurement Indoor air quality Environmental health Measure Mode Surface Temperature (IR) checks surface temperature, utilizing laser pointer, calculates proximity to dewpoint. Built-in Hygrometer Measures or monitors buildings for adequate ventilation affecting indoor air quality and moisture problems. Search Mode Surface Temperature (IR) checks surface temperature, utilizing laser pointer, calculates proximity to dewpoint. Infrared Thermometer Surface Temperature (IR) checks surface temperature, utilizing laser pointer, calculates proximity to dewpoint. Key Features Pin moisture measurement Pinless moisture measurement Ambient relative humidity & temperature measurement Equilibrium humidity measurement in concrete floors Psychometric calculations Laser pointer surface non-contact temerature measurement Data logging Firmware update Features Applications Moisture measurement range: Pin (% WME) 8% to 99, readings over 30% are relative Non-invasive (RF) up to 3/4 in (19 mm) deep 60 to 1000 (relative) Surveyors Home inspectors Temperature probe range: -10 – 50°C Architects Hygrostick data (nominal) 30% to 40% RH (3% RH) at 68F (20°C), 41% to 98% RH (2%) at 68°F (20°C), Range 32°F to 122°F (0°C to 50°C) 0.6°F (0.3°C) Quickstick Data (Nominal) 0% to 10% RH, 3% RH at 68°F (20°C), 10% to 90% RH, 2% RH at 68°F (20°C), 90% to 100% RH, 3% RH at 68°F (20°C), Range 32°F to 122°F (0°C to 50°C) 0.6°F (0.3°C) Nominal response 30% to 90% and back to 30% RH in 45 seconds @ 68°F (20°C) Data Storage Up to 8000 results with date & time stamp from all instrument functions Display: LED Power: 9v battery Four-In-One Moisture Measurement System Measures moisture in wood and wood floors, drywall, concrete and concrete block, stucco, plaster, masonry and other building materials. Search mode Search (non-invasive mode) behind ceramic tile, fine finishes, water stains, tile and vinyl floor coverings, wood, drywall, plaster, masonry, concrete and concrete block. Non-invasive pinless radio frequency finds moisture up to 3/4 in (19 mm) below surface Search mode not adversely affected by surface moisture Measuring mode Measure (pin mode) diagnoses the extent of moisture intrusion for damage assessment and monitor drying out of building structures. Use built-in pin or plug in the heavy duty moisture probe for measuring in hard-to-reach areas Use deep wall pin-type probes to measure moisture in walls, wall cavity insulation, sub and surface structures Use accessories such as hammer probes to measure at depth Humidity mode Hygrometry measures or monitors buildings for adequate ventilation affecting indoor air quality and moisture problems. Measures relative humidity and temperature, dew point and surface temperature, surface proximity to dew point (condensation) and grains per pound, as well as multiple psychrometric calculations Allows measurement of equipment such as dehumidifiers Measures equilibrium relative humidity in concrete floors using the in situ probe method Use to detect conditions for mold and fungus growth, that can lead to unhealthy living conditions Surface Temperature Surface Temperature (IR) checks surface temperature, utilizing laser pointer, calculates proximity to dewpoint. Protimeter MMS2 Documentation View and download this product’s brochure, datasheet, and manual in a PDF format Protimeter MMS2 Datasheet Protimeter MMS2 User Manual