SPECIFICATIONS:Pressure – 20psi minimum to 150psi MaximumVoltage – 24 vac, 60 cycle .4 amps inrush, .25 amps holdingBEFORE INSTALLATION:1. Flush System thoroughly before installing valves. 2. Make sure you have sufficient water supply, pressure and flow.INSTALLING VALVE WITH ADAPTORS:1. Wrap adaptors with 2 or 3 complete wraps of Teflon Tape around threads. 2. Hand tighten adaptors into valve 3. Carefully tighten the adaptors one additional turn past hand tight. 4. Do not use Flow Control handle as a lever.OPERATING VALVE MANUALLY:1. Open Bleed Screw anti-clockwise, water will exit screw hole and valve will open.
