MOTOROLA SLR 8000

Description MOTOROLA SLR 8000 REPEATER MOTOROLA SLR 8000 adalah repeater radio profesional dalam seri MOTOTRBO, bukan handset. Dirancang untuk memperluas jangkauan komunikasi radio satu arah (two‑way), cocok untuk berbagai kebutuhan industri dan publik. Berikut detail lengkapnya: MOTOROLA SLR 8000 dengan kapasitas output pemancar 100 watt dan sensitivitas input penerima yang tinggi, mampu menjangkau area yang sangat luas. Dilengkapi fitur canggih, seperti: analog/digital hybrid, trunking, dan jaringan IP, koneksi repeater ini stabil dan luas. Selain itu, repeater ini juga dapat digunakan sebagai repeater analog atau sebagai repeater campuran analog/digital saat dalam proses migrasi. Keunggulan Motorola SLR 8000 Performa tinggi: output 100 W dan penerima sensitif memperluas jangkauan secara signifikan Hemat ruang: model 2U, ideal untuk instalasi rack tanpa ventilasi tambahan Modular & fleksibel: opsi pre-selector, antenna relay, wireline card, 4‑wire audio—mudah disesuaikan Sistem monitoring & manajemen: fitur pemantauan tegangan, temperatur, VSWR, hingga remote management via IP Sistem operasi campuran: analog digital, mendukung migrasi bertahap ke infrastruktur digital penuh Keandalan dan servis: lulus uji Accelerated Life Testing, dilengkapi layanan servis 1 tahun SLR 8000 Cocok untuk digunakan di: Infrastruktur kritikal (polisi, pemadam kebakaran, layanan darurat) Pabrik, tambang, area industri besar Transportasi dan logistik Jembatan, terowongan, area metropolitan Skenario dengan kebutuhan trunked-capacity seperti Capacity Plus dan Capacity Max Spesifikasi Motorola SLR 8000 GENERAL VHF UHF Frequency Range 136-174 MHz 400-470 MHz Channel Spacing 25*/ 12.5 kHz Channel Step Size 5 Hz Frequency Stability /- 0.5ppm Channel Capacity 64 RF Output Power 1-100 W Dimensions (H x W x D) 3.5 x 19 x 17.25 in (89 x 483 x 438 mm) Weight 31 lbs (14.1 kg) Input Voltage (AC) 100-240 Vac, 47-63 Hz Current (standby), 110 / 240 V 0.25 / 0.3 A Current (transmitting at 100 W), 110 / 240 V 2.1 / 1.1 A (typical) 2.0 / 1.1 A (typical) Input Voltage (DC) 12 V (11.0-15.5 V) / 24 V (21.6-32.0 V) Current (standby), 24 V 0.5 A Current (transmitting at 100 W), 24 V 8.6 A (typical) 8.2 A (typical) Input Power Modes AC only, DC only, AC with Battery Revert Operating Temperature Range -22 to 140 °F (-30 to 60 °C) Humidity RH of 95%, Non-condensing at 50 °C (122 °F) Max Duty Cycle 100% Digital Vocoder Type AMBE 2™ BatteryBattery Charger Capacity (12 / 24 V) 5 A Connectivity, front panel USB B Receptacle, Microphone (RJ45), Speaker (integrated) Connectivity, rear panel Tx (N female), Rx (BNC female), USB A Receptacle, 2x Ethernet, DB25 Accessory Connector, External Reference (BNC Female) External Reference 5 / 10 MHz (Auto-detect) Supported System Types Digital Conventional, IP Site Connect, Capacity Plus, Capacity Max, Connect Plus Analog Conventional, Analog Conventional Voting, MPT 1327 Audio Types Input: Balanced (600 ohms and Country-specific Impedances), Unbalanced (1000 ohms), Microphone Accessory Port. Output: Balanced (600 ohms and Country-specific Impedances), Unbalanced (600 ohms), Integrated Speaker. Audio Levels Input: Balanced: 10 to -30 dBm, Unbalanced: Adjustable, 80 mV rms nominal for 60% RSD. Output: Balanced: 7 to -30 dBm, Unbalanced: Adjustable, 330 mV rms nominal @ 60% RSD. FCC Emission Designators 11K0F3E, 16K0F3E, 7K60FXD, 7K60F7D, 7K60FXE, 7K60F7E, 7K60F7W FCC Type Acceptance ABZ99FT3095 ABZ99FT4098 IC Description 109AB-99FT3095 109AB-99FT4098 Receiver VHF UHF Frequency Range 136-174 MHz 400-470 MHz Sensitivity, 12dB SINAD 0.3 uV (0.22 uV typical) Sensitivity, 5% BER 0.25 uV (0.18 uV typical) Selectivity (TIA603D), 25* / 12.5 kHz 83 / 52 dB 78 / 52 dB Selectivity (TIA603), 25* / 12.5 kHz 83 / 75 dB 80 / 75 dB Intermodulation Rejection (TIA603D/ETSI) 85 / 73 dB (87 / 78 dB typical) Spurious Rejection (TIA603D/ETSI) 85 / 75 dB (95 / 90 dB typical) Audio Distortion < 3% (<1.5% typical) Hum and Noise, 25* / 12.5 kHz -50 / -45 dB (-56 / -52 dB typical) Blocking > 110 dB (113 dB typical) Transmitter   VHF UHF Frequency Range 136-174 MHz 400-470 MHz RF Output Power DC (24 V) or AC 1-100 W DC (12 V) 1-50 W Max Duty Cycle 100% Intermodulation Attenuation 55 dB Adjacent Channel Power (TIA603D), 25*/ 12.5 kHz 75 / 60 dB Adjacent Channel Power (ETSI), 25* / 12.5 kHz 75 / 60 dB (78 / 62 dB typical) Conducted Spurious Emissions 40 dBm < 1 GHz, -30 dBm > 1 GHz Audio Response TIA603D Audio Distortion < 3% (<1% typical) Hum and Noise, 25*/ 12.5 kHz -50 Rated System Deviation, 25* /12.5 kHz ±5.0 / ±2.5 kHz